I don’t recall if I’ve mentioned this before but the 80’s Raleigh frame that I used on the first fixed gear is now “dead”. What happened? Well I’m not quite sure. It’s viewable in one of my Cyclist POV videos, where you can see I’m riding along and all of a sudden the rear wheel locks up and I come to a stop. It’s happened before but never that violently and never just riding along. I realigned the wheel and rode on, but after getting to my destination I realised the wheel no longer looked straight… The rear triangle looked bent. A few second opinions later and I had concluded it must be the end of that frame.
Note: At no point have I actually checked the frame alignment with the available tools.
A few weeks have gone by and now I have version 2 up and running. Version 2 was found on eBay for the small sum of £15. Naturally the colours caught my attention and I had to have it. As luck would have it, nobody else was interested in it and I won the auction for the starting bid. I have to say the seller of this frame has been an absolute pleasure to deal with – possibly the best seller I’ve dealt with. He emailed me as soon as the auction ended and asked if I wanted some further postage quotes and after looking around found one for £4 cheaper than quoted. Unfortunately he hadn’t checked the PayPal transaction and booked the delivery for the wrong address. Nevermind, he got straight onto the courier and had it changed. The courier didn’t even come and collect it and instead it had to be dropped off at the post office and sent from there. I was updated on the whole process and never left out. I wish all sellers were like that!
Anyway, the new build! The frame is a two tone, pink and purple, MBK trainer. I haven’t been able to accurately date it however I’m leaning towards an early 90’s date. Lugless, oval tubing and CRMO – I really like the frame. It has its fair signs of wear and it the colour apparently disgusts come people but I love it. It’s just my size and it’s so light.
Straight away I removed the headset from the old build and fitted that to the MBK frame. The old Halo wheelset went in perfectly, as did my old black stem. This is where things change. Instead of the flat bars I wanted to fit a set of drop bars in black with some all black brakes. I’m only running one brake, yet still decided to fit two levers. Why? Because I like the riding position! Finding the all black bars took a lot of searching on eBay as most 25.4mm clamping bars are for silver in colour for old road bikes! It was worth it though, the black bars and brakes make the pink stand out even more.
When it came to the bottom bracket and crank I had to get something new. The Raleigh uses 26tpi thread and a cottered axle, where as the MBK frame uses a standard 24tpi thread. I have a few spare cartridge bottom brackets that I could have used but something new was more appealing. I decided to head to VeloSolo and take a look at their collection. I opted for the 107mm Stronglight bottom bracket and crank set. It looks amazing and threaded straight into the frame. The Raleigh used a 42 tooth chain ring (I believe) where as the Stronglight uses a 48 tooth. Combined with the 14 tooth sprocket I’ll be getting more top end but hill starts will become a bit tougher. I’ll see how I get on with it and if it’s too tough I’ll swap out the sprocket to a 16 or 18.
The tyre clearances are close but I’m going to swap those out for some Michelin Krylion Carbon when I get some spare cash! (Those tyres are brilliant – I’m using them on the British Eagle in the wet). Apart from that I’m 100% happy with the outcome. The bike feels like a perfect fit and everytime I look at it I find a massive grin creeps across my face. It’s definitely not everyones style. What do you think?