I have no idea where to start with this one. The French giant of Peugeot is somewhat of a mystery to me. I’m looking through website after website trying to track down and translate brochures and literature to find the exact model of this bike. From the small amounts of research I have done, the one thing I can say is it’s not going to be easy. Peugeot seem to have used their own specific sizing for threading and tubes and duplicated very similar transfer patterns between models. I’ve found many a page showing frustration at trying to track down the correct seat post or bottom bracket. Wonderful.
Anywho. Here it is.
The price I paid? 99p. I saw it listed on eBay and expected it to go for much more but on the morning of the auction ending it still had no bids. I took a chance and won it. The seller had described how the fixed cup was, well, fixed but apart from that it was ok. It looked in good condition and I’d spotted the Simplex dropouts so I figured it was worth the money.
Date wise I expected it to be a 1970’s model and after trawling through a few web pages I’ve managed to narrow it down to between ’75 and ’79. That’s all down to the head badge. The original listing stated the seller had removed the badge to sell separately. He did actually offer me the badge when I went to pick up the frame but I turned it down, only to buy it off him a week later after seeing it on a listing. It’s a nice two piece design. Luckily this is one of the things that actually helped out with the research as this is the only raised head badge Peugeot seems to have used.
The frame didn’t come with the handlebars or stem. Those, again, were additional buys off the same gent I got the frame off. It was only after I started researching that I realised the French frames used odd sizes. Off the top of my head, they use a 22mm stem instead of the British 22.2mm. You’d think the .2mm wouldn’t make much of a difference but it does! When I saw the listing for the Atax stem and bars from the same seller (stating they were from the Peugeout) I thought it would be best to buy them! That’s £12.50 into the bike so far.
This is where I started to look into the models a bit more. One of my Instagram followers saw my post and suggested it could be a PX10, the rare and pricey top model. I’m not so sure and think it could be a slightly lower PR10 but with the amount of cross contamination between model lines it’s quite difficult to pinpoint. I think this catalogue HERE shows the differences the best (and why I think it is the PR10). The frame only has chrome dipped forks, rather than the chrome dipped forks AND rear dropouts of the PX10. It has Reynolds tubing but the badge doesn’t seem to quite match the Reynolds badges in the catalogues I have found. The higher spec’d models also seem to have been given the wrap around vertical banding on the tubes, over the horizontal lines.
That being said, if it is the PR10, and I’m 95% sure it is I have found the specific component list I need.
Brakes: Mafac S Centre Pull w/ Mafac Levers
Crankset: Stronglight TS 52/42 – 170mm – Cotterless
Derailleurs & Shifters: Simplex LJA302 / SX810T
Pedals: Lyotard 136 Race w/ Reflectors & Christophe Straps
Freewheel: Maillard 14/17/19/21/24
Hubs: Normandy High Flange Q/R W/Simplex skewers
Rims: Mavic Module E tubular.
To me, that seems like a rather expensive list. Fortunately I’ve found most of the parts already and it seems like buying direct from France is the best bet! Unfortunately I’m slightly out of cash at the moment so those specific parts will have to wait. In the mean time I did find this bargain. I saw them listed as “Vintage Mavic Monthlery Route Wheels”. Looking closer I saw they were tubular and had a set of Normandy high flange hubs. They seemed perfect for this build so I stuck them on my watch list and expected them to shoot up in price. In fact, they didn’t move in price at all and I got them for £25. I might need to replace the spokes and the rims definitely need a good polish but I couldn’t be more happy with them.
Total build spend so far £37.50
More to come soon hopefully.
I don’t recall if I’ve mentioned this before but the 80’s Raleigh frame that I used on the first fixed gear is now “dead”. What happened? Well I’m not quite sure. It’s viewable in one of my Cyclist POV videos, where you can see I’m riding along and all of a sudden the rear wheel locks up and I come to a stop. It’s happened before but never that violently and never just riding along. I realigned the wheel and rode on, but after getting to my destination I realised the wheel no longer looked straight… The rear triangle looked bent. A few second opinions later and I had concluded it must be the end of that frame.
Note: At no point have I actually checked the frame alignment with the available tools.
A few weeks have gone by and now I have version 2 up and running. Version 2 was found on eBay for the small sum of £15. Naturally the colours caught my attention and I had to have it. As luck would have it, nobody else was interested in it and I won the auction for the starting bid. I have to say the seller of this frame has been an absolute pleasure to deal with – possibly the best seller I’ve dealt with. He emailed me as soon as the auction ended and asked if I wanted some further postage quotes and after looking around found one for £4 cheaper than quoted. Unfortunately he hadn’t checked the PayPal transaction and booked the delivery for the wrong address. Nevermind, he got straight onto the courier and had it changed. The courier didn’t even come and collect it and instead it had to be dropped off at the post office and sent from there. I was updated on the whole process and never left out. I wish all sellers were like that!
Anyway, the new build! The frame is a two tone, pink and purple, MBK trainer. I haven’t been able to accurately date it however I’m leaning towards an early 90’s date. Lugless, oval tubing and CRMO – I really like the frame. It has its fair signs of wear and it the colour apparently disgusts come people but I love it. It’s just my size and it’s so light.
Straight away I removed the headset from the old build and fitted that to the MBK frame. The old Halo wheelset went in perfectly, as did my old black stem. This is where things change. Instead of the flat bars I wanted to fit a set of drop bars in black with some all black brakes. I’m only running one brake, yet still decided to fit two levers. Why? Because I like the riding position! Finding the all black bars took a lot of searching on eBay as most 25.4mm clamping bars are for silver in colour for old road bikes! It was worth it though, the black bars and brakes make the pink stand out even more.
When it came to the bottom bracket and crank I had to get something new. The Raleigh uses 26tpi thread and a cottered axle, where as the MBK frame uses a standard 24tpi thread. I have a few spare cartridge bottom brackets that I could have used but something new was more appealing. I decided to head to VeloSolo and take a look at their collection. I opted for the 107mm Stronglight bottom bracket and crank set. It looks amazing and threaded straight into the frame. The Raleigh used a 42 tooth chain ring (I believe) where as the Stronglight uses a 48 tooth. Combined with the 14 tooth sprocket I’ll be getting more top end but hill starts will become a bit tougher. I’ll see how I get on with it and if it’s too tough I’ll swap out the sprocket to a 16 or 18.
The tyre clearances are close but I’m going to swap those out for some Michelin Krylion Carbon when I get some spare cash! (Those tyres are brilliant – I’m using them on the British Eagle in the wet). Apart from that I’m 100% happy with the outcome. The bike feels like a perfect fit and everytime I look at it I find a massive grin creeps across my face. It’s definitely not everyones style. What do you think?
Well. Here’s wishing anyway!
So the majority of my memory when it comes to my Dads car history involves two cars (if I exclude the new ones). The first was an old VW Polo. Unfortunately, that car got written off when someone forgot to look both ways before pulling out. The Polo’s replacement was a Peugeot 106. A tiny 1995 1.1 litre ‘Ski’ variant. It’s been with him ever since. I learnt to drive in it and that was almost 9 years ago so I’d say its been in his ownership for over half it’s life.
Alas. The time has come and he’s decided to part ways. Years ago it was replaced by a newer car but it was kept on the road for a run around and for a first car for my step sister who now has her own car. At the end of last year it ran out of MOT and has sat on his drive since. That was until last week when he decided to get it back on the road.
Unfortunately he found the brake fluid drained yet no sign of a leak. I diagnosed a faulty master cylinder and that was that the tough choice was made to say; enough is enough. I can’t afford to keep a spare car running. It has to go. I know how much time he’s given this car and how well it’s been looked after so it’ll be such a shame to see it go.
And that’s where my brain wave began. The 106 would make an awesome track car. As standard they’re light as anything and with a few choice mods they’re pretty nippy! I had no idea where to start though so naturally I asked a bunch of Honda owners for advice. It turns out quite a few offered some brilliant advice.
The 106 is as basic as you can get. The engine is tiny. It has tiny brakes and sloppy suspension. There’s no anti roll bars and it only has 3 stud hubs. To get it track worthy I’d need to pretty much buy a wrecked GTi and transfer the whole running gear onto the basic shell. A big job but its something I’d love to do before the car ends up in the scrapyard.
There’s only one problem though. As with everything, money is stopping me so here it is. So here’s my plea. Someone help me. Help me turn this car into a track demon. Keep it alive for a little while longer. A track day only car.
Note: The features image car is just an example. Not the actual car.